FREE WORLDWIDE SHIPPING ON ALL ORDERS

Liquid Glass Installation (With Tray)

For old tray video click here.

Preparation:
1. Do not install in areas with direct sunlight.
2. Install in a clean, dust free space. 
3. Install on a flat surface to prevent the liquid from spilling off the screen.
4. Watch the installation video to better familiarise yourself with the installation process.

Step 1. Use the wet cloth and microfiber cloth to clean the screen and the dust sticker to remove any dust.

Step 1

Step 2. Pull the orange bar to the end of the tray. Then place the tray over the phone making sure the direction of the phone is correct.

Step 2

Step 3. Turn the tray around and press the phone into place making sure it is completely flat.

Step 3

Step 4. Flip the orange bar over the phone screen and into the middle groove of the tray. Remove the adhesive bottle lid and place the bottle into the hole in the bar and squeeze and pour the glue onto the screen. 

Step 4

Step 5. Remove the adhesive bottle. Flip back the orange bar and slide it into the top groove of the tray.

Step 5

Step 6. Remove the protective film from the back of the tempered glass and place the glass into the installation tray, bottom side first.

Step 6

Step 7. Pull the orange bar to the end of the tray. The glass will fall onto the screen causing the glue to spread. Wait until the glue covers the whole screen.

Step 7

Step 8. Use the UV light to cure the screen, starting at the bottom, then middle, then top for 15 seconds each.

 *Single pressing the button will turn the light on for 45 seconds. If you press and hold the button until the light comes on, it will stay on for 1 minute.

Step 8

Step 9. Remove the tray from the phone. Use the wet cloth to gently wipe around the edges of the screen

Use the UV light again to cure the bottom, middle and top of the screen, this time for 2 minutes each.

Step 9

The installation is now complete. 

Step 10

If you have any questions or problems, you can always let us know. We will be happy to help.